technology

InBox™ Data Acquisition Modules

The InBox data acquisition modules are a flexible solution for data collecton for condition monitoring. They are configurable for various types of sensors and provide high speed and high resolution data acquisition. Ethernet connectivity directly form the modules simplifies installation and system expansion.

InBox™ Technical Specifications

|   Inputs

Up to 12 Channels for:

IEPE Accelerometer inputs
Analog voltage inputs
2, 3, or 4 wire RTDs
Thermocouples
Strain gauges
Induction proximity probes
Industrial transducers (4 – 20 mA)


Up to 4 Tachometer inputs per module

|  Signal Conditioning

Isolated industrial signal conditioning modules
Interface to all types of external sensors
Isolation to1500Vrms
Accuracy: ±0.03%
Output noise: 150µVrms
240VAC Protection for field I/O
Mix and match different input channels in one InBox TM module

|  Data Acquisition

ADC Resolution: 16 bit
Dynamic Range 96dB max, 90dB typical
Harmonic Distortions: -80dB typical
Dynamic Channels
Anti-aliasing filter: Compound analog & digital filter
Gain steps: 1, 10, 100
Sampling Rate: effective rate 128 Hz to 51.2 kHz
Analysis Frequency Bandwidth: 0.12 Hz – 50 Hz to 12.5 Hz – 20 kHz
Data Block Sizes: up to 16384
Long Block Size in streaming mode
Spectral lines: up to 6400

|  Communications

Network: Ethernet
Addressing: DHCP
Protocol: TCP/IP
Speed: 10/100 Mbit/sec
Automatic self–registration on the network
Automatic connection to the srver in the client mode

|  Power

AC Power 110 – 220 V
Industrial 24VDC (10 to 30 VDC)
Power Over Ethernet (48 VDC)

|  Environmental

Operating Temperature: -20 to +70ºC (-4 to 158ºF)
Storage Temperature: -40 to +85ºC (-40 to 185ºF)
Relative Humidity: 95% non-condensing

|  Physical

Protection: NEMA 4X, IP66
Enclosure: Polycarbonate Plastic Standard; Stainless Steel Optional
Dimensions, 4 channel: 18.0cm (7.1”) x 9.4cm (5.1”) x 8.1cm (3.9”)